Product Description
PEI / spring steel sheet is flexible, removable, high strength, heat resistant and sticks well to magnetic sheets or neodymium magnets. PEI is compatible with PLA, PETG, PEEK, ABS, and any other filaments. No need for tape or glue and no need to struggle to remove prints without ruining your buildtac or breaking your glass. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.100% real Ultem1000（ PEI）amber color, matte surface.-0.2mm thickness
Made in Europe
Made in Europe
This spring steel sheet is flat, flexible, and stainless. sticks to magnets very well.
0.4mm thickness
0.4mm thickness
PEI is 3m tape pre-applied.
PEI is applied on a steel sheet
Recommend print temps
PLA – 60C
HTPLA – 60C
PETG – 70-80C
PCTG – 70-80C
ABS – 100C
Product Usage Guidelines
PETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI
Part Removal– Make sure your plate is close to room temp (under 30C) before removing parts. If you remove it when hot it more likely to damage the surface
